Finn-Power model: E Series E5-25 (Qty: 1) The E5 Work Center, a new-generation, 6-axes precision fabricating system, features a servomotor-driven punch mechanism and is flexible, amazingly accurate, and energy efficient. In the E5 Work Center both the position and speed of the punch and die are programmable like normal CNC axes, which allows punching, nibbling, cutting, forming, marking, bending, and tapping in just a single set up. The machine, which has an automatic loader/unloder that enables it to work without human supervision 24Hrs a day, is suitable for mass production. Technical Data Sheet   Sheet size 3000x1270 mm Sheet weight 200 Kg Punching force 200 kN Number of turret stations 56 Pcs CNC index tool 4 Material thickness 9 mm Upward forming force max. 200 kN Die stroke height in forming Programmable with 0.001 increment (max. 12 mm; NC-axis) (mm) Upward forming speed 25 mm between forms (1/min) 80-150 Amada model: Pega-357 (Qty: 1) The Pega 357 is a mechanical turret punch press with Amada's unique bridge frame design. It provides a maximum 350 hits per minute, with 200 hits on one-inch centers. The Pega 357 is a high production specialist of short-run sheet metal parts. It provides efficient manufacturing of parts with minimum setup and maximum machine utilization. Its forming capabilities help to eliminate secondary operations. Its hydraulic clutch and brake system provides constant and stable punching over long production runs and reduces noise. The machine, which has an automatic loader/unloder that enables it to work without human supervision 24Hrs a day, is suitable for mass production. Technical Data Sheet   Maximum Sheet Size 50" (Y) x 144" (X) with one repositioning cycle Maximum Sheet Thickness 0.250" Maximum Material Weight 220 lbs. Maximum Axis Travel 50" (Y) x 72" (X) Max. Linear Table Speed 2000"/min. Punching Accuracy ±0.004" Hole to Hole Repeatability ±0.001" Press Capacity 33 Tons Press Stroke 1.25" Maximum Hole Diameter 4.5"